Garage Door Springs Repair Services

Overhead garage doors function on garage door springs regardless of whether your garage door runs on tracks in one solid piece or rolls up in multiple sections. These springs are used to aid the garage door in the opening and closing process, this is why, and they may lose their tension or break over time. These springs cannot be fixed and they need to be rewound or replaced. It is essential to understand the tensed parts and another operating system of the garage door before attempting the DIY garage door repair project and calling a professional garage door expert when to replace a garage door spring. In this article, you will get more information about garage door spring services.

Components of garage door:

The garage door runs on the heavy metal tracks that are connected to the walls of the garage. Well, there are several types of garage doors available in a market with respective materials, styles, and spring types such as tension and extension garage door springs or a combination of both.

  • Swing up garage doors:

In this design, the garage door runs on the horizontal metal tracks that are mounted high on the walls of the garage. In this model of garage door, these tracks should slant down slightly towards the backside of the garage. A set of powerful and heavy-duty springs on either side is connected to the frame of the garage door and hooked to the garage door itself. When the springs of your garage door are in tensed position, it is worth inspecting the mounting brackets to find out the loose hardware of springs such as screws and plates that are used to mount the springs.

  • Roll-up garage doors:

In this model of garage door, the metal tracks curve from a vertical position to a horizontal one in order to allow the garage door to roll up and down on the tracks smoothly. Unlike garage doors that swing up, the springs are used to control the movements of the garage door with the helped pulleys and cable system. You can adjust the tension of springs by just pulling on the cable and re-tying the knots in order to decrease and increase the length of the cables.

Note:  If your garage door has one spring that is located at the center of the garage door then call a professional garage door repair specialist rather than trying to fix or replace it on your own.  It is important to avoid injuries because these springs are extremely tensioned which hold a great amount of pressure. The tension of springs is so high that can hurt or kill you if you are not experienced in the management of garage door springs.

Garage door spring repair and replacement project:

Even on the garage doors with extension springs, replacing them is a challenging task that is not ideal as a Do-It-Yourself project. If you feel up to the challenge make sure that you have the right replacement part with the right size and diameter. You should be familiar with the winding bars of the springs which will enable you to be comfortable on the new garage door part. Winding the spring in either way means to store the energy which can cause serious injuries if you are not extremely careful.

Garage Door

There are many online tutorials and videos available for the garage door spring replacement process, but there are a few important tips and tricks to keep in mind while doing this project. First of all, close your garage door completely and stop the garage door opener to disconnect the power supply, place a wooden ladder to one side of your workplace place to avoid the path of winding bars. Always keep a strong grip on the winding bars and install them firmly into the winding cone holes of the torsion springs. Under winding, springs will make your garage door too hard and heavy to open while over-winding springs will cause the garage door to bounce up. If you have any doubt about your skills to safely replace the garage door springs, then don’t hesitate to call a professional garage door technician.